Crawler shot blasting machine is suitable for multi-species, large or medium-scale production of workpiece surface derusting or shot-peening, cleaning the workpiece must be afraid of collision single weight below 150kg castings and heat treatment parts, the machine can be used stand-alone, but also can be used for wiring. It belongs to the scope of casting machinery. Automatic: The workpiece is placed in a rubber track roller. The operator presses the "Run" button. The blasting chamber door is closed pneumatically. The shot blasting is started. The track runs forward. The workpiece is continuously tumbling. The high efficiency powerful blasting machine will throw The pellets are ejected at high speed onto the surface of the workpiece that is tumbling, and the workpiece can be cleaned completely and evenly. The steel pellets flow into the screw conveyor through the hole in the crawler, and then the steel pellets are sent to the bucket elevator, and are lifted to the separator by the bucket elevator, and are separated and stored for use. After shot blasting, the blasting chamber door is automatically opened, the crawler belt is reversed, and the workpiece is discharged. Crawler Shot Blasting Machine Application: Cleaning and light decoration of die castings, precision castings and precision forgings. Remove surface oxides from heat-treated parts, castings, and forgings. Spring strengthening. Fastener rust removal and pretreatment.