Tilt Drum Shot Blasting Machine's application and features
The tilt drum blasting machine, the company is one of the latest research and development of the standard series of cleaning equipment. The machine can be used to clean and easy to flip the workpiece is not easy to drop crashed non-brittle parts and the core is not deep casting, forging and welding parts, removing sand and surface oxide. The whole machine adopts Siemens PLC control, high degree of automation, both stand-alone work, but also the use of wiring.

Compared to the crawler shot blaster average was more uniform, and more power savings.

Princile and Structure
The drum machine from the cradle, drum tilting mechanism, cylinder cover, projectile circulatory system, shot blasting, loading mechanism, hydraulic system and electrical constitution.
Cradle roller
Cradle roller consists of the following components:
1The cleaning chamber
From both sides of the thick steel plate coupling into the chamber body through the intermediate square tube steel. Mainly used to carry the drum and the drive. Action coupling cylinder drum cleaning process to achieve shaken up and down, so that the workpiece is sufficiently stirred to clean.
2 Cradle body
The steel plate welded into the outer cone barrel, the middle roll band have lined abrasion resistant polyurethane sheeting, wear board has flipped workpiece rib, bottom opened a lot of holes, bullet and clean up the scale, sand, flash etc from leaking through this hole after the upgrade separation.
3 Cradle drive
There are two central drum hanging plastic roller support, the rear is a rotation center of the spherical bearings. Driven by the idler gear to drive the drum rotation.
4 Enclosure
Roller cover the entire opening of the sealed package to prevent splashing projectiles and projectile recovery and clean up the scale, sand, burrs, etc., in order to separate recycling.
5 Cradle reversing mechanism
The entire mechanism is controlled by a hydraulic system. Cylinder by cylinder to realize the operation of the lid opening, closing and barrel cleaning process of shaking up and down.

 Exports to America


 SKF Bearing