3710 Hook type shot blasting machine was shipped!

 

Hook Shot Blasting Machine As a standard shot blasting machine, the working cylinder diameter is from 900 to 1300 mm, and the height is from 1300 to 2200 mm. The standard model has 2-7 throwing heads, and the maximum carrying capacity is up to With 10,000 kg, this shot blasting machine has a very high production efficiency and a very flexible span. It is an ideal cleaning and strengthening device, and it is easy to operate. It only needs to load the workpiece to be processed on the machine and press the start button. The short time (usually 5-7 minutes) completes the entire cleaning process and removes all dust and residual pellets. It is mainly applied to the surface treatment of various medium and large castings, forgings, weldments, and heat treatment parts. Including fragile and irregularly shaped workpieces.

Shot blasting equipment was first applied to the surface casting and cast iron parts of the foundry industry to remove sand and oxide scales.
Almost all steel castings, ash castings, ma steel parts, and ductile iron parts are shot blasted. This is not only to remove surface oxide and casting sticky sand, but also the quality check before casting indispensable preparation process, such as large gas turbine casing before performing nondestructive testing must be carried out strictly Abrator to ensure that the testing results reliability. In general casting production, shot blasting is an indispensable technique for discovering casting surface defects such as subcutaneous pores, slag holes, and sticking, cold septa, and peeling. Surface cleaning non-ferrous metal castings, such as aluminum, copper alloys, etc., in addition to scale removal, that the surface of the casting defect, the more important purpose is to cast shot die casting to remove burrs and surface quality is obtained having a significant decoration , get comprehensive results. In the production of metallurgical iron and steel, shot blasting or pickling is a technological process used to ensure the combination of mechanical or chemical removal of phosphate skin in order to obtain high productivity in the mass production of steel. In the production of silicon steel sheets, stainless steel sheets, and other alloy steel sheets and strips, annealing must be performed during the cold rolling process before shot blasting or pickling to ensure the surface roughness and thickness accuracy of the cold rolled steel sheets.


If you have any question about shot blasting machine,please contact us!