Wet sand blasting pot used in precision molds, electronic parts, piston rings, aviation parts, titanium
Pieces of surface pretreatment, circular saw blades and oil cleaners.
Features:
1. Can use ultra-fine abrasive for precision work-piece surface treatment;
2. Sandblasting liquid recycling, low consumption of sand, nozzle wear is small, low cost of production;
4. Simple operation, less failure rate;
5. Clean the heat treatment parts, welding parts, castings, forgings and other surface oxide scale, cleaning quality can reach Sa3 level
6. Micro-burrs, surface residues, and the like
7. The roughness Ra value of the work-piece surface can be increased or decreased within a certain range
8. Change the stress state of the work-piece surface, can improve the wear resistance and fatigue strength of parts
9. To improve the movement with the occasional lubrication conditions, can reduce the movement with the occasional movement of noise, etc .; can also be used for renovation of the old pieces.
working principle:
Pressure-type sandblasting system is the water, abrasive storage in the sand tank, compressed air through the air regulator and the total control of the ball into the sand tank, so that the formation of pressure inside the closed sand tank. Open the control of the gun switch, water, abrasive, compressed air through the bottom of the flange after mixing into the sand pipe, and then sprayed from the nozzle high-speed, fired processing surface.
Adjust the amount of sand control valve can change the size of sand.
After the abrasive is used up, close the control of the gun switch, turn off the gas control valve, open the sand tank on the exhaust ball valve, the tank of compressed air exhausted, from the new water, plus abrasive recycling.

Model	Capacity (Cubic Foot)	Lasting Time Per Feeding (Min)	Pot Dimension (HxWxD)	Weight (Kg)	Operation Pressure	Includes
DB150	1	15	1067x584x533 mm	~72	30-150PSI	1)15m hose 2)Tungsten Carbide nozzle 3)Lifetime warranty：2 years
DB225	2	30	1397x660x863 mm	~120	30-150PSI
DB500	5	60	1397x914x1016 mm	~167	30-150PSI
DB800	8	90	1626x914x1016 mm	~194	30-150PSI
DB1500	15	120-180	1981x1245x1245 mm	~380	30-150PSI	1)30m hose 2) Activator valve 3)Tungsten carbide nozzle 4)Large loading capable 5) Lifetime warranty：2 years
DB1500 Offshore	15	120-180	1829x1219x2413 mm	~725	30-150PSI
DB3000	30	240-360	2489x1245x1245 mm	~544	30-150PSI